Carrier-class design - ECS4810-12M is a carrier grade aggregation switch consists of 12 Combo Gigabit Ethernet ports.
Continuous Availability - The ECS4810-12M supports G.8032 Ethernet Ring Protection Switching with the ability for the network to detect and recover from incidents without impacting users, meeting the most demanding quality and availability requirements. Rapid recovery time when problems do occur is as low as 50ms.
Service Monitoring and Management - The ECS4810-12M supports IEEE 802.1ag Connectivity Fault Management (CFM) and ITU-T Y.1731, allowing service provider to monitor end to end services, identify connectivity and performance issues and isolate the problem from a remote location without dispatching engineer onsite.
Advanced Synchronization - ECS4810-12M provides synchronization options optimized for cellular operators looking to backhaul their data and voice traffic from the BST to their core network over Ethernet transport.
Comprehensive QoS - ECS4810-12M supports Three Color Marker and Policing Single rate: Committed Information Rate (CIR) Two rate: CIR + Peak Information Rate (PIR) Traffic Policing: Drop or remark the priority tag of packets exceeds burst size
Virtual Private Network - ECS4810-12M supports L2 VPN by using QinQ functions in which an 802.1Q tag from a customer VLAN (called CE-VLAN ID) is encapsulated in a second 802.1Q tag from a serviceprovider network (called an SP-VLAN ID).
|
Features
|
|
Physical
|
12 Gigabit combination (RJ-45/SFP) ports
Dual power inputs with 1 AC and 1 DC power connector
1out-of-band 1000 Mbps RJ-45 management port
1 RJ-45 console port
1 DB15 alarm port
|
|
Performance
|
Switching Capability: 24 Gbps
Packet Buffer Size: 8 MB
MAC Address Table: 16K
|
|
L2 Features
|
Tri-speed (10/100/1000BASE-T) copper interfaces
Auto-negotiation for port speed and duplex mode
Dual-speed(100 Mbps and 1000 Mbps) fiber interfaces
SFP support for1000BASE-SX/LX/LHX/ZX transceivers
Digital Diagnostic Monitoring (DDM)
|
|
Flow Control
|
IEEE 802.3x for full-duplex mode
Back-Pressure for half-duplex mode
|
|
Spanning Tree Protocol
|
IEEE 802.1D Spanning Tree Protocol (STP)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
BPDU Guard
BPDU filtering
Root Guard
BPDU transparent
Loopback detection
|
|
ITU-T G.8032 Ethernet Ring Protection
|
Sub 50 msec convergence
Revertive operation mode
Multiple-ring network
|
|
VLANs
|
Supports 4K VLANs
Port-based VLANs
IEEE 802.1Q VLANs
IEEE 802.1v Protocol-based VLANs and Subnet-based
|
|
VLANs
|
MAC-based
VLANs Traffic Segmentation
GVRP
|
|
L2 Virtual Private VLANs
|
Q-in-Q
Selective Q-in-Q
L2 protocol tunneling (xSTP, CDP, VTP, LLDP and PVST+)
Support Voice VLANs
|
|
Link Aggregation
|
Static trunks
IEEE 802.3ad Link Aggregation Control Protocol
|
|
Trunk groups |
6, up to 8 ports per group |
|
IGMP Snooping |
IGMP v1/v2/v3 snooping
IGMP Proxy reporting
IGMP Filtering
IGMP Throttling
IGMP Immediate Leave
IGMP Querier
MVR (Multicast VLAN Registration)
Support 5 Multicast VLANs |
|
Port Mirroring |
Supports Jumbo frames up to 10 KB |
|
QoS Features
|
|
Priority Queues
|
8 hardware queues per port
|
|
Traffic Classification
|
IEEE 802.1p CoS
IP Precedence
DSCP
MAC access control lists (source/destination MAC, Ethertype, priority ID/VLAN ID)
IP standard access control lists (source IP)
IP extended access control lists (source/destination IP, protocol, TCP/UDP port number)
|
|
Traffic Scheduling
|
Strict Priority
Weighted Round Robin
Strict + WRR traffic scheduling
Weighted Random
Early Detection
Two Rate Three Color Marker
Ingress traffic policing
Egress traffic shaping
Marking/remarking
|
|
Rate Limiting (ingress and egress, per port base)
|
GE: Resolution 64 Kbps ~ 1000 Mbps Bundle Rate Control
|
|
Security
|
|
Security
|
Port security
IEEE 802.1X port-based and MAC-based authentication
Dynamic VLAN assignment
QoS Assignment, ACL Assignment
MAC authentication
Web authentication
Voice VLAN, Guest VLAN
|
|
L2/L3/L4 Access Control List |
MAC Access control lists (source/destination MAC, Ethertype, priority ID/VLAN ID)
IP standard access control lists (source IP)
IP extended access control lists (source/destination
Ip protocol, TCP/UDP port number)
IPv6 ACLs DHCP Snooping DHCP Option 82
IP Source Guard
Dynamic ARP Inspection
Login Security
RADIUS authentication
TACACS + authorization and accounting
TACACS+ 3.0
Management Security
SSH (v1.5/v2.0)
SSL for HTTPS
SNMPv3
|
|
OAM
|
|
IEEE 802.3ah Link
|
|
IEEE 802.1ag Connectivity Fault Management
|
Connectivity check
Loopback
Linktrace ITU-T Y.1731 Performance and Throughput
|
|
Management |
Frame Delay
Frame Delay variation |
|
Synchronous Ethernet
|
|
ITU-T g.8262 Synchronous Ethernet
|
|
Green Ethernet
|
|
Cable Diagnostics
|
|
IPv6 Features
|
|
IPv4/IPv6 dual protocol stack
|
|
IPv6 Address Types Stack
|
Unicast
IPv6 Neighbor Discovery
SNMP over IPv6
HTTP over IPv6
Remote IPv6 ping
|
|
Management Features
|
|
Switch Management
|
CLI via console port or Telnet
WEB management
SNMP v1, v2c, v3
|
|
Firmware and Configuration |
Firmware upgrade via TFTP server
Multiple configuration files
Configuration file upload/download via TFTP server
RMON (groups 1, 2, 3 and 9)
BOOTP, DHCP client for IP address assignment
DHCP dynamic provision option 66, 67
SNTP
Event/Error Log/Syslog, SMTP
Supports LLDP (802.1ab)
IP clustering |
|
(Optional) ECView Pro, powerful network management software that maximizes the managed capabilities of Edgecore devices with: |
Topology management
Performance management
Configuration management
Event management
SNMP management |
|
Electromagnetic Compatibility
|
|
Electromagnetic Compatibility
|
CE Mark
FCC Class A
CISPR Class A
|
|
Environmental Specifications
|
|
Temperature
|
IEC 68-2-14
0ºC to 60ºC (Standard Operating)
-40ºC to 70ºC (Non-Operating)
|
|
Humidity
|
10% to 90% (Non-condensing)
|
|
Vibration |
IEC 68-2-36, IEC 68-2-6 |
|
Shock |
IEC 68-2-29 |
|
Drop |
IEC 68-2-32 |
|
Power Supply
|
|
Dual Power Inputs
|
AC 110 V ±10 V, 60 Hz ±3 Hz
DC -42 V~-56 V
|
|
Internal, auto-ranging transformer
|
100 to 240 VAC, 50 to 60 Hz
|
|
Power Consumption
|
16.1 Watts maximum
Dying gasp
|
|
Mechanical
|
|
Dimensions (W x D x H)
|
25.2 cm x 44 cm x 4.4 cm (0.82 x 17.3 x 1.73 in)
|
|
Weight
|
3.32 kg (7.31 lb)
|
|
LED Indicators
|
Port, Uplink, System, Diagnostic
|
ECS4810-12M is a carrier grade aggregation and access switch consists of 12 Combo Gigabit Ethernet ports. With 1 out of band 1000Mbps RJ45 Management Port + 1 DB15 alarm port. ECS4810-12M provides dual power input with AC and DC and the operating temperature is ranging from 00C to 600C, the Fan-less design ensures noiseless operation and increase the reliability of the system.
Nokta Elektronik ve Bilişim Sistemleri
Datasheet
| Tarih |
Versiyon |
Açıklama |
İndir |
|
29-9-2017
|
|
ECS4810-12M
|
 |
Firmware
| Tarih |
Versiyon |
Açıklama |
İndir |
|
30-6-2016
|
|
ECS4810-12M FW_v1.2.0.1
|
 |
Kullanım Kılavuzu
| Tarih |
Versiyon |
Açıklama |
İndir |
|
8-6-2016
|
|
ECS4810-12M Installation Guide
|
|
|
20-10-2016
|
|
ECS4810-12M Web Management Guide-R05
|
|
|
3-10-2016
|
|
ECS4810-12M CLI Reference Guide-R05
|
|
Sertifika
| Tarih |
Versiyon |
Açıklama |
İndir |
|
5-7-2016
|
|
ECS4810-12M CE DOC
|
|
|
29-6-2016
|
|
Edgecore RoHS Declaration ECS4810-12M
|
|