PLANET Managed Industrial Ethernet Switch, ISW-1033MT, offers high reliability and security to make sure the continuous industrial operation in harsh environments such as control cabinet of transportation, factory floors, outdoor space, and where in extreme low or high temperatures. In the industrial networking environments, each networked device is required to keep running continuously in the hazardous status. If the industrial equipment looses its connection to the network, it might influence the entire operation of industrial systems and thus cause incredible financial losses. By applying the ISW-1033MT Managed Industrial Switch which complies with all the requirements of industrial applications, customers would have the advantages of high reliability, fast recovery capability, and safe Ethernet network operation.
• Factory Redundant Ring Application
|
Donanım Özellikleri |
|
Bakır Portlar |
7 10/ 100Base-TX RJ-45 Auto-MDI / MDI-X ports
3 10/100/1000Base-T RJ-45 port |
|
Switch Throughput |
5.65Mpps@64bytes |
|
SFP / mini-GBIC Slot |
3 SFP interfaces, shared with Port-7, Port-9 and Port-10 |
|
Switch Architecture |
Store-and-Forward |
|
Switch Fabric |
7.4Gbps / non-blocking |
|
Switch Throughput |
5.5Mpps |
|
Adres Tablosu |
8K entries |
|
Data Aktarım Hızı |
1Mbit |
|
Maximum Frame Size |
1522 Bytes |
|
Akış Kontrolü |
Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex |
|
LED |
Per unit: Power (Green), Power 1 (Green), Power 2 (Green), Fault (Red)
7 port 10/100: Link/Activity (Green), Full duplex/Collision (Yellow)
SFP port: LNK/ACT(Green), 1000T: LNK/ACT(Green), 1000M(Green) |
|
Konsol Arayüzü |
One RJ-45-to –RS-232 male connector for switch management |
|
Güç Tüketimi |
10.2Watts |
|
Ölçüler (W x D x H) |
72mm x 105mm x 152mm |
|
Ağırlık |
998g |
|
DI / DO |
2 Digital Input (DI):
Level 0: -30~2V
Level 1: 10~30V
Max. input current: 8mA
2 Digital Output(DO):
Open collector to 40VDC, 200mA |
|
ESD Koruma |
6KV DC |
|
EFT Koruma |
3KV DC |
|
Layer 2 Fonksiyonu |
|
Yönetim Arayüzü |
Console, Telnet, Web Browser, SNMP v1, v2c and v3 |
|
Port Konfigürasyonu |
Port disable / enable
Auto-negotiation 10/100Mbps full and half duplex mode selection
Flow Control disable / enable
Bandwidth control on each port |
|
Port Durumu |
Display each port's speed duplex mode, link status, Flow control status. Auto negotiation status |
|
VLAN |
Port-Based VLAN, up to 9 VLAN groups
IEEE 802.1q Tagged Based VLAN , 4K VLAN ID, up to 256 VLAN groups |
|
Spanning Tree |
IEEE 802.1D Spanning Tree
IEEE 802.1w Rapid Spanning Tree |
|
Link Aggregation |
Supports 4 groups of 4-Port trunk support |
|
QoS |
Traffic classification based on :
• Port Number,
• 802.1Q Tag,
• 802.1p priority:
Port Base,
Class Of Service,
TOS field in IP Packet |
|
IGMP Snooping |
v1 and v2
256 multicast groups and IGMP query |
|
Band Genişliği Kontrolü |
Per port bandwidth control
Ingress: 100Kbps~102Mbps or 100Kbps ~ 256Mbps(Gigabit port)
Egress: 100Kbps~102Mbps or 100Kbps ~ 256Mbps(Gigabit port) |
|
Port Mirror |
RX / TX / Both |
|
Güvenlik |
Supports 100 entries of MAC address for static MAC and another 100 for MAC filter
Supports 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder |
|
SNMP MIBs |
RFC-1213 MIB-II
RFC-2863 Interface MIB
RFC-1493 Bridge MIB
RFC-2674 Extended Bridge MIB (Q-Bridge)
Private MIB |
|
EMI |
FCC Class A, CE |
|
Güvenlik |
UL, E331236 |
|
Standart Uygunluğu |
|
Standart Uygunluğu |
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX/100Base-FX
IEEE 802.3ab 1000Base-T
IEEE 802.3z Gigabit SX/ LX
IEEE 802.3x Flow Control and Back pressure
IEEE 802.1D Spanning tree protocol
IEEE 802.1w Rapid spanning tree protocol
IEEE 802.1p Class of service
IEEE 802.1Q VLAN Tagging
IEEE 802.1x Port Authentication Network Control |
|
Çevresel Özellikler |
|
Çalışma |
Sıcaklığı: -40 ~ 75 Degree C
Nem Oranı: 5% ~ 90% |
|
Saklama |
Sıcaklğı: -40 ~ 85 Degree C
Nem Oranı: 5% ~ 95% (non-condensing) |
Nokta Elektronik ve Bilişim Sistemleri