.

.

CertiFiber®

CertiFiber® Pro Optical Loss Test Set

  • Optical loss test set with fastest time to certify – two fibers at two wavelengths in under three seconds.
  • Encircled Flux compliant as required by ANSI/TIA and ISO/IEC
  • Merged Tier 1 (Basic) / Tier 2 (Extended) testing and reporting when paired with OptiFiber® Pro OTDR
  • ProjX™ management system ensures all jobs are completed correctly and efficiently
  • Optical loss test set provides automatic Pass/Fail analysis to industry standards or custom test limits
  • Double ended Pass/Fail certification of fiber optic connector endfaces
  • Graphical indication of problem areas on fiber endfaces due to contamination, pits, chips and scratches
  • Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
  • Taptive™ user interface provides simple, animated guidance to eliminate incorrect reference setup and “negative loss” errors.
  • Convenient quad module supports both multimode and singlemode loss testing
  • Extended singlemode distance range to 130km
  • Optical loss test set with built in Visual Fault Locator
  • Analyze test results and create professional test reports using LinkWare™ Management Software
  • Compatible with LinkWare™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management Software
  • The CertiFiber Pro Optical Loss Test Set improves the efficiency of fiber optics certification. The Taptive user interface simplifies set-up, eliminates errors and speeds troubleshooting. A set reference wizard ensures correct reference setting and eliminates negative loss errors. Built on the future-ready Versiv platform, CertiFiber Pro Optical Loss Test Set (OLTS) provides merged Tier 1 (Basic) / Tier 2 (Extended) testing and reporting when paired with OptiFiber Pro module. A convenient quad module supports both singlemode and multimode and is multimode Encircled Flux compliant. Copper certification and Wi-Fi Analysis and Ethernet troubleshooting modules are also available. Analyze test results and create professional test reports using LinkWare Management Software.
    CertiFiber Pro’s Optical Loss Test Set (OLTS) double ended fiber optic inspection capability allows you to inspect and certify fiber optic connector end-faces at both ends of your fiber link in less than a second so you can get your job done the first time. This double ended fiber optic inspection capability provides automated PASS/FAIL certification, takes the guess work out of fiber inspection so anyone can be a fiber expert.

    CFP-Q-AD                       
    CertiFiber Pro Quad  (MultiMde & SingleMode) OLTS Add-on Kit: CerfiFiber Pro Quad OLTS (2) modules
    CFP2-100-S INT           CertiFiber Pro Wi-Fi enabled with MultiMode OLTS Modules: Versiv2 Main & Remote + MultiMode OLTS (2) modules

    CFP2-100-M INT          CertiFiber Pro Wi-Fi enabled with MultiMode OLTS Modules: Versiv2 Main & Remote + MultiMode OLTS (2) modules
    CFP2-100-Q INT          CertiFiber Pro Wi-Fi enabled with Quad (Multimode and Singlemode) OLTS Modules: Versiv2 Main & Remote + Quad OLTS (2) modules
    CFP2-100-QI INT         CertiFiber Pro Wi-Fi enabled with Quad (Multimode and Singlemode) OLTS Modules with double-ended fiber inspection: Versiv Main
                                                                        Units (2) +  Quad OLTS (2) modules + Inspection camera FI-1000 (2)

 

 

Power Meter Specifications

Input Connector

Interchangeable connector adapter (LC standard, SC, ST and FC optional)

Detector Type

InGaAs

Wavelengths

850 nm, 1300 nm, 1310 nm, 1550 nm

Power Measurement Range

0 dBm to -65 dBm (850 nm) 0 dBm to -70 dBm (all other wavelengths)

Power Measurement Uncertainty1,2 < +/- 5% +/- 32 pW
Measurement Linearity3 < ± 0.1 dB
Re-calibration Period 1 year
Integrated Wi-Fi Meets IEEE 802.11 a/b/g/n; dual band (2.4 GHz and 5 GHz)

Loss/Length Specifications

Specification

CertiFiber Pro Multimode Modules

CertiFiber Pro Singlemode Modules
Testing Speeds (excludes referencing times) Smart Remote mode: < 3 seconds
(2 wavelengths, one direction, auto wavelength detection)
Far End Source mode:≤ 2 seconds
(2 wavelengths, one direction auto wavelenght,
one direction auto wavelength detection)
Loopback mode: ≤ 2 seconds (2 wavelengths,
one direction auto wavelength detection)
Smart Remote mode: < 3 seconds (2 wavelengths, one direction, auto wavelength detection)
Far End Source mode:≤ 2 seconds (2 wavelengths, one direction auto wavelength detection)
Loopback mode.:≤ 2 seconds (2 wavelengths,
one direction auto wavelength detection)
Input/Output Connectors Interchangeable connector adapter
(LC standard, SC, ST and FC optional)
Interchangeable connector adapter
(LC standard, SC, ST and FC optional)
Launch Condition1,2 Encircled Flux compliant to TIA-526-14-B,
ISO/IEC 14763-3 and IEC 61280-4-1
Encircled Flux compliant to TIA-526-14-B,
ISO/IEC 14763-3 and IEC 61280-4-1
Fiber Types Tested 50/125 µm or 62.5/125 µm singlemode
Source Type and Wavelengths LED source 850 nm ± 30 nm
1300 nm ± 20 nm
Fabry-Perot laser diode 1310 nm ± 20 nm
1550 nm ± 30 nm
Maximum Length Measurement 12 km 130km
Length Measurement Accuracy ± 1.5 m plus ± 1 % of length ± 1.5 m plus ± 1 % of length
Output Power (Nominal) ≥ -24 dBm with EF-TRC ≥ -4 dBm
Output Power Stability3 ± 0.05 dB over 8 hours ± 0.03 dB over 15 minutes ± 0.1 dB over 8 hours ± 0.08 dB over 15 minutes
Loss/Length Specifications ) contiuned
Source Wavelengths 850 nm, 1300 nm, 1310 nm, 1550 nm
Power Measurement Range 0 dBm to -65 dBm (850 nm) 0 dBm to -70 dBm (all other wavelengths)
Power Measurement Uncertainty1, 2 < +/- 5% +/- 32 pW
Measurement Linearity3 < ± 0.1 dB
Re-calibration Period 1 year
1. +/- 100 pW at 850 nm 2. Under the following conditions: Power level 100 μW (-10 dBm), continuous wave (CW) for absolute
power at 850 nm and 1310 nm. Divergent beam, NA = 0.20 for 50/125 μm and NA = 0.14 for 9/125 μm. Ambient temperature
23° ± 1°C. SC/UPC connector with ceramic ferrule. After a 5 minute warm-up. Traceable to NIST. 3. -3 dBm to -55 dBm at 850 nm
and 1310 nm. Ambient temperature 23° ± 1°C. After a 5-minute warm-up.
Selected Specifications
Title Requirement
Output Power >-5 dBm <0 dBm SMF-28 singlemode fiber Continuous wave SC/UPC connector
Operating Wavelength 650 nm nominal
Output Modes Continuous wave
Pulsed mode (2 Hz to 3 Hz blink frequency)
Connector Adapter 2.5 mm universal
Laser Safety Class II CDRH
Over operating temperature range
Environmental Specifications
Title Requirement
Operating Temperature -10° C to 45° C
Storage Temperature -10° C to +60° C
Operating Relative Humidity
% RH without condensation
0 % to 90 %, 32 °F to 95 °F (0° C to 35° C)
0 % to 70 %, 95 °F to 113 °F (35° C to 45° C
Vibration Random, 2 g, 5 Hz-500 Hz
Shock 1 m drop test with and without module and adapters
Safety CSA C22.2 No. 1010.1: 1992
EN 61010-1 1st Edition + Amendments 1, 2
Pollution Degree 2
Altitude Operating: 4,000 m; storage: 12,000 m
EMC EN 61326–1

 

Unique Features

Versiv enables users to accomplish more than ever before with a cable tester, accelerating every step of the testing process
ProjX management system eases tasks from initial set-up of a job to system acceptance. It eliminates redundant steps, and ensures that all tests are completed correctly the first time, and every time.
Taptive user interface puts advanced data analysis and easy set-up and operation at the fingertips of technicians of all skill levels.
LinkWare management software provides unmatched analysis of test results and professional test reports

 

Standards

Allows combined OLTS Tier 1 (basic), OTDR Tier 2 (extended) certification, end-face inspection and reporting when paired with OptiFiber™ Pro OTDR
Set reference wizard verifies test reference cords (TRCs) per ISO/IEC 14763-3 and eliminates negative loss errors
Encircled Flux compliant optical launch conditions required by ANSI/TIA and ISO/IEC standards
Double ended fiber optic end-face certification to IEC 61300-3-35


Performance
Three-second Autotest- (four times faster than legacy testers) includes optical loss measurement of two fibers at two wavelengths with distance measurement and optical loss budget calculation Provides automatic Pass/Fail analysis to industyr standards or costom test limits Identfies incorect test procedures resulting in negative loss results Dauble ended Pass/Fail certification of fiber optic connector and-faces Graphical indication of problem areas on fiber end-faces due to contamination, pits,chilps and scratches Interchangeable power meter adapters available for all typical connector types(SC,ST,LC and FC) to enable the most accurate 1-jumper reference method Built-in visual fault locator for basic troubleshooting and polarity determination Dual wavelength measurement capability on a single fiber allows the tester to be used in applications that require only one fiber link     

 
ProjX™ Management System
Versiv’s ProjX™ System manages jobs from set-up to systems acceptance, ensuring that all tests are completed correctly. Enter the testing details for a job once, and ProjX stores them in a project file with a name the whole team can understand. Change modules or jobs without having to re-enter details. Support multiple testers on the same job by sharing project files via USB sticks or email.

                      

 

Taptive™ User Interface
Versiv is driven by Taptive, the most advanced user interface for a field tester. With a gestured based interface, technicians and project managers of all skill levels can eliminate costly errors and do more faster with fewer key strokes, set-up wizards, swiping, pinch to zoom, and access to more data right at their fingertips.



Link Ware™ PC Cable Test Management Software

Managing test results and creating professional test reports is the legacy of LinkWare, giving Project Managers full capabilities to monitor workflow and consolidate test results.
LinkWare PC pulls data together into a single report that is easy for customers to understand, showcasing quality and workmanship. LinkWare Stats feature in LinkWare PC, provides automated statistical reports that turns test results into charts to reveal performance. The report even summarizes your entire cabling and fiber infrastructure in one compact, graphical format, so it is easy to verify margins and anomalies.

 



Link Ware™ Live Test Results Management Service

LinkWare Live is a cloud-based service that lets you manage certification jobs anytime, anywhere, with anyone on any device.  With LinkWare Live, you can
Keep track of every test on every job.  Get an overview of every project from any smart device. Drill down to each individual test. Instantly receive notification of incorrect test setting or cable IDs.
Get it right the first time. Define cable IDs and test settings from your PC or tablet. Then send them to the testers or Brother printers at the jobsite for mistake-free testing and labeling.
Keep your testers up to date. Standards can change without notice, and an out-of-date test report can mean hours of re-testing. LinkWare Live automatically ensures your testers are running the latest.
Stop wasting time and gas driving testers back to the office. Integrated Wi-Fi allows you to upload your test results straight from the job site to LinkWare Live. Then download them automatically to the right job for fast report generation with LinkWare PC.
Avoid Project Delays. Track the last used location and monitor the status of all testers to ensure they are always calibrated and running the latest firmware*
LinkWare Live Test Result Screen for St. Peter Hospital

 

 

 

 

Nokta Elektronik ve Bilişim Sistemleri

Datasheet

Tarih Versiyon Açıklama İndir

22-1-2020

CertiFiber®

Kullanım Kılavuzu

Tarih Versiyon Açıklama İndir

22-1-2020

CertiFiber®

Fotoğraf

Tarih Versiyon Açıklama İndir

22-1-2020

CertiFiber®

22-1-2020

CertiFiber®