Environmental Specifications

Operating temperature

-10º C to 50º C

Storage temperature

-20º C to 50º C

Operating Humidity

95% (10º C to 35º C) Non-Condensing 75% (35º C to 40º C) Non-Condensing Uncontrolled <10º C

EMI, RFI, EMC

Standards compliant1

Optical Power Meter

Detector Type

InGaAs

Calibrated Wavelengths

850 nm, 1300 nm, 1310 nm, 1490 nm, 1550 nm, 1625 nm

Measurement Range

+10 to -52 dBm (850 nm) +10 to -60 dBm (1300, 1310, 1490, 1550, 1625 nm

Power Measurement Linearity

±0.2 dB (850 nm)1 ±0.1 dB (1300, 1310, 1490, 1550, 1625 nm)2

Power Measurement Uncertainty3

±0.25 dB

Display Resolution, dB or dBm

0.01 dB

Auto Dual-Wavelength Switching

Yes

Power Display Units

dBm, mW, μW

Auto-Wavelength Detection

Yes

Data Storage

1000 records, multiple wavelengths per record

External Interface

USB, 2.0 full speed

Optical Connector

Removable adapter, SC adapter as default, optional adapters include LC, ST

Display update rate

1 reading per second

Reference

Individually set for each wavelength

FindFiber ID detection

Yes

Power Requirement

2 AA Alkaline batteries

Battery Life4

> 50 Hours (typical)

Automatic Power Off

10, 20, 30 or 60 minutes (can be disabled by user)

Low Battery Warning

Yes, low battery icon blinks

Size (L x W x H)

6.4 in x 3.2 in x 1.5 in (16.5 cm x 8.0.cm x 3.9 cm)

Weight

11.5 oz (325 grams)

For 850nm, ±0.2 dB for power from 0 to -45 dBm, ±0.25 dB for power < -45 dBm 2±0.1dB for power from 0 to -55 dBm, ±0.2 dB for power > 0 dBm and < -55 dBm 323°C ±2°C, power level -20dBm, continuous wave, 62.5/125µm at multi mode wavelengths, 9/125 µm at 1310,1490, 1550 and 1625 nm; add 0.1 dB for 1625 nm, 4For measured power levels 0 dBm or less, battery life depends on the condition and type of batteries used. Fluke Networks recommends alkaline batteries.

Multimode Optical Source

Emitter Type

LED.

Central Wavelength

850 nm, 1300 nm

Wavelength Accuracy

850 nm: +/-30 nm 1300nm:+/-20nm

Spectral Width (FWHM)

850 nm: 50 nm (typical) 1300 nm: 135 nm (typical)

Minimum Output Power

850/1300 nm: ³ -20 dBm

Power Output Stability1

±0.1 dB over 8 hours

Auto Dual-Wavelength Switching

Yes. Can be enabled/disabled by user.

Optical Output Connector

Fixed SC

FindFiber Code Generation

Yes. Fixed at ID 1.

Modes

CW, 2 kHz modulated, Auto-wavelength

Power Requirement

2 AA Alkaline batteries.

Battery Life2

40 hrs (typical)

Automatic Power Off

30 minutes (can be disabled by user)

Low Battery Warning

Yes, LED blinks

Size (L x W x H)

5.6 in x 3.2 in x 1.6 in (14.2 cm x 8.1 cm x 4.1cm)

Weight

1.8 oz (278 g)

1 23° C ± 2° C, after 5 minutes warm-up time 2 In auto-wavelength mode, battery life depends on the condition and type of batteries used. Fluke Networks recommends alkaline batteries

Singlemode Optical Source

Emitter Type

1310 nm/1550 nm: dual FP laser 1490 nm/1625 nm: dual DFB laser

Central wavelength

1310 nm: ±20 nm 1550 nm: ±30 nm 1490 nm: ±3 nm 1625 nm: ±5 nm

Wavelength Accuracy

1310 nm: +/- 20 nm 1550 nm: +/- 30 nm

Spectral width (RMS)

1310 nm: 2 nm (maximum) 1550 nm: 3 nm (maximum) 1490 nm/1625 nm: 1 nm (maximum)

Minimum output power

1310/1550 nm ≥ -7dBm (typical) 1490 nm/1625 nm: ≥ -3 dBm (typical)

Power Output Stability1

±0.25 dB over 8 hours

Auto Dual-Wavelength Switching

Yes. Can be enabled or disabled by user

Optical Connector

Fixed SC

Launch Condition

9/125 μm fiber

FindFiber Code Generation

1310/1550 source is fixed at ID 2 1490 nm/1625 nm is fixed at ID 3.

Modes

CW, 2 kHz modulated, Auto-wavelength

Power Requirement

2 AA Alkaline batteries

Battery Life2

30 hrs (typical)

Automatic Power Off

30 minutes (can be enabled or disabled by user)

Low Battery Warning

LED blinks.

Size (L x W x H)

5.6 in x 3.2 in x 1.6 in (14.2 cm x 8.1 cm x 4.1cm)

Weight

9.8 oz (278 grams)

1 23° C ± 2° C, after 5 minutes warm-up time 2 In auto-wavelength mode, battery life depends on the condition and type of batteries used. Fluke Networks recommends alkaline batteries.

FindFiber Source Specifications

Emitter Type

Laser

Source Connector

Fixed SC

FindFiber Code Generation

1 through 8. Default is 3.

Power On/Low-battery Indicator

LED

Power Requirement

2 AA Alkaline batteries

Battery Life

> 80 Hours (typical)

Automatic Power Off

30 minutes

Low Battery Warning

LED blinks

Size (L x W x H)

7.1 in x 1.3 in x 1.0 in (17.9 cm x 3.2 cm x 2.5 cm)

Weight

4.4 oz (125 g)

Safety

Meets Class 1 CDRH

 

SimpliFiber Pro Kit Configurations
Whether you require basic fiber verification capabilities, advanced cable troubleshooting and inspection, or documented loss and power measurements, Fluke Networks’ SimpliFiber Pro® Optical Loss Test Kits provide you with the rugged, high quality tools that meet your fiber testing needs.

Complete Fiber Verification Kit (FTK1475)
The Complete Fiber Verification Kit is for contractors and network technicians who install and maintain premises networks with both multimode and singlemode optical fiber. Use this kit to verify optical loss and power levels at 850, 1300, 1310, and 1550 nm, inspect fiber end-faces, locate cable faults, connector problems, and polarity issues. Kit includes FI-500 FiberInspector Micro.

Complete Fiber Verification Kit (FTK1450)
The Complete Fiber Verification Kit is for contractors and network technicians who install and maintain premises networks with both multimode and singlemode optical fiber. Use this kit to verify optical loss and power levels at 850, 1300, 1310, and 1550 nm, inspect fiber end-faces, locate cable faults, connector problems, and polarity issues. Kit combinations offer a variety of inspection options.


Full-Featured Inspection and Multimode Verification Kits (FTK1375)
The Full-Featured Inspection and Multimode Verification Kits are for contractors and network technicians who install and maintain multimode premises networks. Use these kits to verify optical loss and power levels at 850 and 1300 nm, inspect fiber end-faces, locate cable faults, connector problems, and polarity issues. Kit includes FI-500 FiberInspector Micro.

Full-Featured Inspection and Multimode Verification Kits (FTK1300 and FTK1350)
The Full-Featured Inspection and Multimode Verification Kits are for contractors and network technicians who install and maintain multimode premises networks. Use these kits to verify optical loss and power levels at 850 and 1300 nm, inspect fiber end-faces, locate cable faults, connector problems, and polarity issues. Kit combinations offer a variety of inspection options.   

Basic Verification Kits (FTK1000-MM and FTK2000-SM)
The Basic Verification Kits are great starter kits for contractors and network technicians who install and maintain fiber links. Available in singlemode or multimode configurations, quickly verify optical loss and power levels at 850 and 1300 nm or
1310 and 1550 nm. Add additional sources, microscopes, and VFL options as needed.  

Copper and Fiber Technician's Kit (CIQ-FTKSFP)
Consisting of the CableIQ (CIQ-KIT) and the SimpliFiber Pro Basic Verification Kit (FTK1000), Fluke Networks' Copper and Fiber Technician's Kit provides a robust combination of tools to help you expertly manage your network to it keep it running smoothly and inexpensively.  Simple-to-use straight from the box, you can do everything from quickly troubleshooting and qualifying cabling link bandwidth to verifying optical fiber power and loss.  

 

Fiber Inspection
The FI-500 FiberInspector Micro fills the gap between a manual scope and a fully automated inspection scope. The FI-500 has the simplicity and practicality of a manual inspection scope, but with advanced features to reduce troubleshooting and inspection time. The built-in PortBright flashlight helps you find the right port or cable. The small-profile probe fits into tight spots, and features pushbutton controls for simple operation. Autofocus provides a sharp view of the endface in a few seconds, while the pause button freezes the image and automatically centers the fiber ferrule on the crisp 320 x 240 display for more detailed inspection

 

An important addition to your verification, troubleshooting, and inspection tasks is fiber cleaning. Dirt, dust, and other contaminants are the enemy of high-speed data transmission over optical fiber. Today's network applications require more bandwidth, making loss budgets tighter than ever. It is critical that all optical connections are clean and free of contaminants to ensure application success.

Fluke Networks’ Fiber Optic Cleaning Kits have the best tools to effectively remove the toughest contaminants with ease.

FI-500 FiberInspector Micro
FI-500 FiberInspector Micro - includes 4 tips (1.25 mm, 2.50 mm, SC, LC), case, rechargeable batteries and universal power adapter

 

NFC-KIT-BOX
Fiber Optic Cleaning Kit includes cleaning cube with wipes, five cards with sealed cleaning zones, solvent pen and 2.5mm port cleaning swabs.

NFC-KIT-CASE
Fiber Optic Cleaning Kit includes cleaning cube with wipes, ten cards with sealed cleaning zones, solvent pen, 2.5 mm port cleaning swabs and 1.25 mm port cleaning swabs in a rugged carrying case.

 

Manage fiber test results with LinkWare Cable Test Management Software.

Fluke Networks' powerful LinkWare software helps you quickly organize, edit, view, print, save, or archive test results by job site, customer, campus building, and more. You can merge test results into an existing database and then sort, search, and organize by any number of data fields or parameters.

LinkWare is available free from our web site. As a contractor, once your work is done, you can give this powerful application to your customer so they can have instant access to the data electronically or you can export the data as an Adobe Portable Document Format (PDF).

Extensive data management capabilities with LinkWare:

• Manage copper and fiber test results with a single software application that supports Fluke Networks' entire line of cable testers
• Deliver professional, customized, graphic reports in a common format for all Fluke Networks cable testers
• Ensure standards compliance with the ability to configure and print TIA 606-A documentation
• New drag-and-drop feature makes it easier to manage and organize multiple projects
• Count on compatibility with major CMS (cable management software) applications
  Increase productivity with simple user interface and time saving features with lınkware the worlds preferred cable test management software

LinkWare prints professional, graphical reports with color graphs depicting the measured test parameters. You can choose which parameters to print and the order in which graphs appear. Reports can also be customized with your company logo.

LinkWare Stats provides a graphical analysis of your entire cable plant
LinkWare now supports LinkWare Stats, an automated statistical report option that allows you to move above and beyond the page-per-link report and see your entire cabling infrastructure. It analyzes and transforms LinkWare cable test data into graphics that reveal your cabling plant performance-summarizing your entire cabling infrastructure in a compact, graphical format that makes it easy to verify margins and spot anomalies.

See what LinkWare Stats can do with your data - a free demo version of LinkWare Stats is included with every copy of LinkWare.

 

The laser-powered VisiFault™ Visual Fault Locator verifies continuity and polarity, and helps find breaks and bends in cables, and locate problems in connectors and splices. VisiFault emits a bright beam of red light easily visible from a distance. Connect the VisiFault to one end of a fiber - then locate that fiber at the other end, even if it is one of many fibers either in a cable or terminated in a rack. Perform simple end-to-end continuity checks.

VisiFault can quickly illuminate fiber breaks, damaged connectors on patch cords, defective splices in splice trays, and tight fiber bends in and around equipment racks. The choice of a continuous wave output mode for steady fault illumination or a flashing output mode makes for easier fault location.

The integrated universal 2.5 mm adapter makes for easy connection to SC, ST, FC, and FJ connectors. The optional 1.25 mm adapter allows for connection to LC and MU connectors. Attach the VisiFault to your belt using a lanyard or in the carrying case so it is always on hand when you need it. Long battery life for hours of use, includes two AA batteries giving you more than 80 hours of continuous mode battery life.

Fluke Networks built the VisiFault to last.
VisiFault incorporates an energy-absorbing holster over an impact-resistant case to withstand drops, impacts and rough treatment. Together with a heavy-duty tethered end cap to protect the fiber adapter, VisiFault is the VFL for demanding field applications. Unlike more fragile VFLs that utilize a flashlight body or plain plastic case, Fluke Networks engineered the VisiFault custom-case to be compact, ergonomic and mechanically tough for field use.

 

 

 

 

Nokta Elektronik ve Bilişim Sistemleri

Datasheet

Kullanım Kılavuzu

Fotoğraf