FiberInspector™ Micro

Fiber Inspection Scope Camera to verify that Fiber End Faces are not contaminated or damaged

  • PortBright™, a built-in flashlight illuminates dark areas and dense panels
  • Fiber inspection scope camera with autofocus for stable images in few seconds
  • Large display to view singlemode and multimode fiber endfaces
  • Includes 4 UPC tips (LC, SC, 1.25 mm and 2.50 mm). APC, Bulkhead tips available.
  • Autocenter for precise fiber ferule inspection
  • Dirty fiber optic endfaces are the major cause of problems in singlemode and multimode fiber optic systems. The FI-500 FiberInspector™ Micro fiber inspection scope camera removes the hassle associated with inspecting fiber end faces, especially in low light and high cable density situations. It is very simple to use: Simply plug the cable into the FI-500 and touch the AF button. Within seconds, the fiber endface comes into sharp, clear view. And if you're working in a difficult to reach place or you can't get the image to stand still, just touch the pause button to freeze the image.
    • PortBright™ illumination to see ports in dark and dense panels
    • Autofocus for stable images in a few seconds
    • Large display to view single mode and multimode fiber end faces
    • Includes 4 UPC tips (LC, SC, 1.25 mm and 2.50 mm). APC tips available
    • Autocenter for precise fiber ferule inspection

    Today's high density fiber patch panels make inspection a challenge. Finding the cable or port to test can be tough, especially in the low light conditions found in most data centers and wiring closets.

    The FI-500 is designed to simplify the inspection process. The built-in PortBright flashlight helps you find the right port or cable. The small-profile probe fits into tight spots, and features pushbutton controls for simple operation. Autofocus camera provides a sharp view of the endface in a few seconds, while the pause button freezes the image on the crisp 320 x 240 display for more detailed inspection.

    The FI-500 FiberInspector Micro fills the gap between a manual scope and a fully automated inspection scope. The FI-500 has the simplicity and practicality of a manual inspection scope, but with advanced features to reduce troubleshooting and inspection time.

    Manual fiber inspection scopes are simple to use, but they don't work well on patch panels or situations where there is a high density of fiber. Holding it up to one eye and closing your other eye is often inconvenient or impractical, especially in a dark room.

    Fully automatic inspection scopes analyze and grade the cleanliness of fiber connections which is important for many applications, but analysis is usually not needed for quick basic troubleshooting.



General Specifications

Temperature range without the power adapter

Operating: 0 °C to +50 °C

Storage : -30 °C to +60 °C

Temperature range without the power adapter

Operating: 0 °C to +40 °C

Storage : -20 °C to +60 °C

Humidity range

Operating: 0% to95% °C(0 °C to+50 °C) RH non-condensing

Storage : 0% to 95% (35 °C to 45 °C) RH non-condesing


Operating: 4,000 meters

Storage : 12,000 meters


2 g, 5 Hz to 500 Hz


1 meter drop test


IEC 61010-1 3rd Edition IEC 62133

Magnification 1x, 2x, 4x
Frames per second ≥12
Battery type* Rechargeable NiMH, 2 x 1.2V, 2700 mAh
Battery life 3 hours of continuous probe use
6 hours of typical probe use
Charge time 4 hours minimum
Power adapter Input: 100 to 240 VAC±10%, 50/60Hz
Output: 6 VDC, 3 A maximum Class
Display 3.2 inch TFT LCD, 320 x 240
Software upgrades Upgrades can be installed from a USB drive
Input USB 2.0, Type A
Dimensions 5.5 in x 3.2 in x 1.5 in (140 mm x 80 mm x 39 mm)
Weight 9.7 oz (275 g)
Magnification 200x. Zoom function has 1x, 2x and 4x settings
Camera type 5 Megapixel 1/4-inch CMOS sensor
Field of view 610 μm x 460 μm
Resolution 1 μm
Light source LED, >100,000 hr life
Endface illumination Coaxial blue LED
Port illumination 2 white LEDs
Power Supplied through the USB interface
Output Video output through USB 2.0 interface
Dimensions 4.6 in x 2 in x 0.95 in (117 mm x 51 mm x 23 mm) (length depends on adapter tip)
Weight 4.4 oz (125 g)(with no adapter tip)



Nokta Elektronik ve Bilişim Sistemleri


Tarih Versiyon Açıklama İndir