.

.

ICS-102S15

RS-232 / RS-422 / RS-485 over Fast Ethernet Media Converter

RS-232 / RS-422 / RS-485 over Fast Ethernet Media Converter

Serial Port
Arayüz RS-232 / RS-422 / RS-485
Konnektörler 3-in-1 DB9
Baud rate (Data Rate) 300bps to 921600bps
Data Bits 5,6,7,8
Stop Bit 1,2
Akış Kontrolü None, RTS / CTS, Xon / Xoff
Sinyal RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-
RS-485(2-wire): Data+, Data-
RS-485(4-wire): Tx+, Tx-, Rx+, Rx-
Fast Ethernet Port
Standartlar 100Base-FX
Konnektör  SC Interface : ICS-102 / ICS-102S15
LC Interface : ICS-105A
Mode ICS-102: Multi-Mode
ICS-102S15: Single Mode
ICS-105A : Vary on SFP Module

Mesafe

ICS-102: 2km
ICS-102S15: 15km
ICS-105A : Vary on SFP Module
Optik Dalga boyu ICS-102: 1300nm
ICS-102S15: 1310nm
ICS-105A : Vary on SFP Module
Kablo ICS-102: 50/125μm or 62.5/125μm multi-mode fiber cable
ICS-102S15: 9/125μm single-mode cable
ICS-105A : Vary on SFP Module
Koruma Built-in 1.5KV magnetic isolation
Donanım Özellikleri
LED System: Power
TP or Fiber Port: Link / Active
Serial Port: Serial port mode, RS-232, RS-422 or RS-485
Yönetim Arayüzü Web Management
PLANET Smart Discovery Utility
VCOM
Operation Mode Virtual COM Port
TCP Server
TCP Client
UDP Client
Pair Connection
Ölçüler (W x D x H) 97 x 70 x 26 mm
Ağırlık 200g
Güç Gereksinimi External Power Adaptor 5V DC / 2A max.
Güç Tüketimi  5.5 Watts (max)
Mechanical Metal
Çevresel Özellikler Çalışma Sıcaklığı: 0~50 Degree C
Saklama Sıcaklığı: -10~70 Degree C
Çalışma Nem Oranı: 10%~90% RH
Saklama Nem Oranı: 5%~90% RH
Emisyon FCC Class A, CE Certification
Standartlar • IEEE 802.3 10Base-T,
• IEEE 802.3u 100Base-TX / 100Base-FX
• EIA / TIA RS-232 / 422 / 485
Regulatory Approval RoHS
Compatible Media Converter Chassis MC-700 / 1500
Note Reset Button at the rear panel for reset to factory default

Access Control System – traditional installation
Most of the enterprises and governments use access control plate and Mifare or RFID to authorize entrance identity. With traditional deployment, access control machines use the RS-232 or RS-485 serial interface and cables connecting to login server. With connection with the ICS-10x Serial over Fast Ethernet Converter, the access control machine is able to be extended over longer distances via fiber optical interface. The distance can be up to 20km in a local range. The ICS-10x can also be linked to a XDSL router to get the internet access capability; then the access control can be set and monitored over the internet.

ICS-102 / ICS-102S15 / ICS-105A

Process Control
The PLC (Programmable Logical Control) is required to monitor, configure and manage the Robot conveyer including other machines in the manufacturing process. The ICS-10x can be set to TCP Server mode and connect with the PLC. Therefore, the administrator can remotely configure and set command settings through Fast Ethernet intranet to control the PLC, the administrators and workstations. There is no need for the administrators to be always by the I/O machine.

ICS-102 / ICS-102S15 / ICS-105A

RTU Data Collect – UDP Mode
The RTU (Remote Terminal Unit) may be applied to collect and monitor the data of waves, signal and power utilization. Connecting the RTU with the ICS-10x in UDP mode, the data can be sent over Fast Ethernet to local server or over Internet to remote server automatically.

Surveillance Motion Control – Pair Connection Mode
Using pair connection along with the fiber optical patch cord, the ICS-10x extends the remote central surveillance monitoring with the control keyboard/joystick via RS-232 / RS-422 / RS-485 interfaces

ICS-102 / ICS-102S15 / ICS-105A

Nokta Elektronik ve Bilişim Sistemleri