.

.

FST-80x Series

10/100BASE-TX to 100BASE-FX Smart Media Converter

1000BASE X FIBER OPTIC 10M-100M AUTO MDI MDIX METAL HOUSING WALL MOUNTABLE

Distance Extended with Fiber Optic Cable
PLANET FST-80x Smart Media Converter series provides media conversion between 10/100BASE-TX and 100BASE-FX interfaces, such as multi-mode ST/SC connectors (2km), single-mode SC connector (15/35/50km) and single fiber connector using the wavelength-division multiplexing (WDM) technology (20/60km) to enable to extend links over long distances using fiber optic cable.

Enhanced Smart Management Features
The FST-80x series provides auto MDI/MDI-X on their TP port and store-and-forward mechanism to eliminate faulty packets. Use the DIP switch from the FST-80x to configure the available smart functions, such as the half/full duplex, auto-negotiation / force and 10/100Mbps options for TP and fiber interfaces. Besides, the Link Loss Return (LLR) and Link Loss Carry Forward (LLCF) functions can immediately alarm network administrator once there is a media link issue, thus helping to monitor the status of the entire network.

Easy Installation
The FST-80x series can be connected easily and cost-effectively as these smart media converters can be used as a standalone unit when powered on by its DC adapter, or used as a slide-in module connected to PLANET 19-inch, 16-slot web smart/managed media converter chassis (MC-1600MR/MC-1600MR48 and MC-1610MR/MC-1610MR48). When working with the web smart/managed media converter chassis, the status of the FST-80x can be monitored via the local RS-232 console and remote web interface.

Hardware Specification
Standards IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX and 100BASE-FX
Copper Port 1 x 10/100BASE-TX port, auto-negotiation,
auto-MDI-MDI-X
Optical Port 1 x 100BASE-FX
Fiber Connector FST-801: ST / Multi-mode -- 2km
FST-802: SC / Multi-mode -- 2km
FST-802S15: SC / Single Mode -- 15km
FST-802S35: SC / Single Mode -- 35km
FST-802S50: SC / Single Mode -- 50km
FST-806A20: WDM SC / Single Mode -- 20km
FST-806B20: WDM SC / Single Mode -- 20km
FST-806A60: WDM SC / Single Mode -- 60km
FST-806B60: WDM SC / Single Mode -- 60km
Optical Wavelength FST-801: 1310nm
FST-802: 1310nm
FST-802S15: 1310nm
FST-802S35: 1310nm
FST-802S50: 1310nm
FST-806A20: TX: 1310nm, RX: 1550nm
FST-806B20: TX: 1550nm, RX: 1310nm
FST-806A60: TX: 1310nm, RX: 1550nm
FST-806B60: TX: 1550nm, RX: 1310nm
Maximum Launch Power (dBm) FST-801: -14
FST-802: -14
FST-802S15:0
FST-802S35:-8
FST-802S50:0
FST-806A20:-8
FST-806B20:-8
FST-806A60:0
FST-806B60:0
Minimum Launch Power (dBm) FST-801: -20 (62.5/125µm), -23.5 (50/125µm)
FST-802: -20 (62.5/125µm), -23.5 (50/125µm)
FST-802S15: −20
FST-802S35: -15
FST-802S50:-5
FST-806A20:-14
FST-806B20:-14
FST-806A60:-5
FST-806B60:-5
Receive Sensitivity (dBm) FST-801: -31.8
FST-802: -31.8
FST-802S15: -32
FST-802S35:-34
FST-802S50: -35
FST-806A20:-31
FST-806B20:-31
FST-806A60:-34
FST-806B60:-34
Maximum Input Power (dBm) FST-801: -14
FST-802: -14
FST-802S15:0
FST-802S35:0
FST-802S50:0
FST-806A20:0
FST-806B20:0
FST-806A60:0
FST-806B60:0
Speed Ethernet: 10/20Mbps for half / full-duplex
Fast Ethernet: 100/200Mbps for half / full-duplex
Maximum Forward Packet Size 1600Bytes
DIP Switch DIP-1: Fiber full / half duplex mode
DIP-2: Copper forced mode / auto-negotiation mode
DIP-3: Copper speed 10Mbps / 100Mbps
DIP-4: Copper full / half duplex mode
DIP-5: Fiber LLR (Link Loss Return) enable / disable
DIP-6: Fiber LLCF(Link Loss Carry Forward) enable / disable
LED Indicator System: PWR
TP: LNK/ ACT, FDX/ COL, 100
FX: LNK/ ACT, FDX/ COL
Power Input DC 5V, 2A
Power Consumption 6.2 watts/ 21 BTU (maximum)
Dimensions (W x D x H) 94 x 81 x 26 mm
Weight 0.22kg
Cable 10BASE-T: 2-pair Cat3, 4, 5 UTP cable, up to 100 meters
100BASE-TX: 2-pair Cat5 UTP cable, up to 100 meters
100BASE-FX:
-50/ 125μm or 62.5/ 125μm multi-mode fiber cable, up to 2km
- 9/ 125μm single-mode cable, providing long distance of 15/20/35/50/60km
Operating Environment 0~50 degrees C, 5~90% RH
Storage Environment -10~70 degrees C, 5~90% RH
Emission FCC Class B, CE mark

 

Standalone and Centrally-managed Media Converter Installation
PLANET FST-80x adopts the advanced media conversion technology to meet the demand for today’s growing networking. It provides a diverse choice of fiber connecting types to meet different network applications. It is very flexible for the FST-80x to work as a standalone device or to be installed in the central web smart media converter chassis for centralized management, which supports hot swapping to avoid network downtime. The FST-80x is ideal for building a network solution of FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) and FTTB (Fiber to the Building) for ISPs, campuses and enterprises.

 

Nokta Elektronik ve Bilişim Sistemleri

Datasheet

Tarih Versiyon Açıklama İndir

8-5-2015

1.0

FST-80x Series

Kullanım Kılavuzu

Tarih Versiyon Açıklama İndir

7-5-2010

1.2

FST-80x Series